When designing a bathroom, there are many things that need to be considered. Whether it is the division of the bathroom space or the placement of other equipment, or even some hidden installation of water pipes, it is a matter of attention in the bathroom decoration. Among the precautions for bathroom decoration, there is a lot of attention to the installation and acceptance of water pipes. This not only needs to be taken into account when designing the bathroom, but also pays more attention to it during construction and acceptance.
The quality of hot and cold water pipes
When testing whether the quality of hot and cold water pipes meets the standards, it is necessary to check whether the water pipes meet the Furukawa safety standards and hygiene standards. At the same time, it is also necessary to measure the size and wall thickness of the flow pipe. The material of the water pipe cannot be ignored.
You must know that the most widely used in my country today is PPR pipes and steel pipes. Galvanized pipes and copper pipes are also used to a certain extent. Secondly, there is a difference in the use of hot and cold water pipes for water pipes made of plastic such as PPR. The wall thickness of the cold water pipe is 2 mm thinner than that of the hot water pipe.
Installation of hot and cold water pipes
As we all know, there are certain specifications and processes for the installation and construction of water pipes. Therefore, when checking and accepting the water pipes, it is necessary to carefully check the connections of the water pipes. It must be ensured that the joints of the water pipes are installed tightly and there is no problem of water leakage.
At the same time, it is also necessary to ensure the firmness of the installation of the water pipe, and the surroundings of the pipe sleeve where the water pipe passes through the wall must be treated with strict fireproof blocking materials.
Whether the water meter has quality problems
When checking the appearance, it is necessary to ensure that the water meter is equipped with a protective cover and a ground connection for lightning protection. Secondly, it needs to be run to test whether the water meter can operate normally.
Turn on the faucet to see if there is water
If you want to know the water quality in the water, you need to check whether there is a stop valve installed to prevent the pipe from rusting and affect the water quality test. If you find that there is a rust problem, you can ask the developer to come and replace it.
Every faucet must be inspected, and the upper and lower water pipes must be carefully observed for leakage, seepage, and blockage. However, it should be noted that the water flow should be as large and urgent as possible when testing. For one thing, the water pressure can be checked. On the other hand, you can also check the drainage speed by the way.
Is the water pressure in the water pipe sufficient?
If you want to check whether the water pressure in the water pipe is sufficient, you need to use a pressure measuring instrument to detect the specific water pressure. The method is also very simple, you only need to run the water for a while, and visually check whether it can normally meet the daily water needs of the whole family.
When designing the bathroom, it is necessary to formulate a decoration plan in combination with the precautions for bathroom decoration. When checking and accepting water pipes, it is also necessary to comprehensively and comprehensively incorporate all factors into the scope of detection.
