What are the sanitary partition materials? It is very good to design dry and wet separation when the bathroom is decorated, so that the bathroom will not be in a humid environment for a long time. However, when designing a partition in the bathroom, which partition material should you choose? How to install the bathroom partition? In this regard, let’s take a look at it in detail below, hoping to help everyone.
What are the sanitary partition materials?
1. Moisture-proof board
The moisture-proof board is to add a certain proportion of moisture-proof particles in the production process of the base material, also known as the melamine board. It is made of multi-layer special fiber materials, soaked with an appropriate amount of phenolic resin, and pressed at high temperature and high pressure. The degree of water expansion is greatly reduced, and the wood fiber is added with a special moisture-proof agent, and the surface is decorated with melamine, which is formed at one time by high temperature and high pressure. All mechanical properties, physical properties, and surface properties meet the requirements of the German Industrial Standard DIN, and the quality is excellent. It is the best choice for bathroom partition materials.
2. PVC board
PVC board is a board made of PVC as a raw material with a honeycomb mesh structure in section. It is a kind of vacuum blister film, which is used for the surface packaging of various panels, so it is also called decorative film and adhesive film. It is used in many industries such as building materials, packaging, and medicine. It has waterproof, flame retardant, acid and alkali resistance. , anti-moth, light weight, heat preservation, sound insulation, shock absorption characteristics, the same processing as wood, and the processing performance is far superior to wood, it is an ideal substitute for wood, aluminum, and composite boards.
3. Tempered glass
Beautiful and stylish tempered glass belongs to safety glass. Tempered glass is actually a kind of prestressed glass. In order to improve the strength of glass, chemical or physical methods are usually used to form compressive stress on the glass surface. Wind pressure, cold and heat, impact, etc., are very good.
4. Metal material
The utilization rate of metal materials in shower partition materials is also good. For example, toilet partitions made of metal materials have many other advantages besides being waterproof, such as light weight, energy saving, easy installation, maintenance and recyclability. Strong, high strength, good rigidity, not easy to deform, large load capacity, even if it is impacted by external forces, it can maintain its shape and is not easy to change, good sound insulation, heat preservation, heat insulation, moisture-proof, fire-proof effect, non-toxic, environmental protection And many other advantages.
How to install the toilet partition?
1. Ask the customer to agree to place the product in the designated place and use soft objects to cushion it so as not to damage the floor or goods; clean up the installation site, clean up the pre-determined location for installing the shower room, and verify the size;
2. Open the package, take it out and check whether the product accessories are damaged;
3. Install the stone base: measure the size and place it on the stone base. After making it parallel, vertical and horizontal, fix it with glass glue, etc. After fixing, do not move the stone base to avoid damaging the viscosity of the glue;
Four: According to the position of the fixed glass of the house body, the fixed glass set on the aluminum material is first locked to one end of the upper and lower rails with screws, and then the other two corners of the fixed glass are locked to the upper and lower rails with F clips;
5. The house can be placed flat on the ground and raised with foam or thick wood blocks.
1. Put two pieces of movable glass into the wheel groove of the upper rail and the groove of the lower rail according to the instructions of “side display” (when installing two pieces of movable glass into the upper and lower rails, the attention should be even, and the entry should be consistent and not random Turn the screw of the boom so that the wheels are not uneven);
2. After the two pieces of movable glass are correctly installed in the room body, use screws to fix the other aluminum edge material to the upper and lower rails, and then insert the two aluminum edge material of the locking wall;
6. Move the assembled room to the stone foundation, adjust the position and level, mark the mark on the wall through the screw hole of the aluminum side material, and then move out of the room; first use a glass drill with a suitable aperture Drill through the tiles, then use a percussion drill with the corresponding aperture to drill deep into the upper wall hole, and then insert the expansion rubber plug;
seven,
1. Move the assembled house to the previous position and fix the house to the wall with screws;
2. Install the aluminum decorative cover on the aluminum side material
8. Install handles, magnetic suction strips and water retaining strips, etc.;
9. Check whether all the accessories are installed, check the firmness of the house, and ask the customer to check and accept. After the customer has passed the acceptance, explain the use precautions and maintenance details to the customer in detail, and finally fill in the after-sales service form, etc.
