In the final stage of family decoration is the process of sanitary ware installation, many people think that this is the decoration company, and the owner has nothing to do with it. In fact, it is not, even if the end of the decoration can not be taken lightly, the owner as the user of the new home must carefully monitor the whole decoration process to ensure the completion of the decoration. So in the process of sanitary ware installation, there are three things that must be paid attention to. Xiaobian will introduce it in detail today.
I. Installation schedule
Generally, the products that are installed by the business are carried out after the completion of the basic construction. What the owner needs to do is to select the brand of the business in advance, and then make an appointment about the installation time. If the product is not the same business, it is best not to choose the installation on the same day. It can be installed at the same time if it does not affect each other.
2. Avoid destructive installation
Manufacturers directly to the installation of products do not rest assured, in the installation of the best to do a good job of supervision, to avoid damaging installation, before installation should do a good job of protective measures around the area, such as protective cardboard on the floor, to avoid scratching the wall in the process of handling, when installing, To avoid wall and ground cracking caused by improper operation.
Three, installation supervision details
1, cabinet installation details
Cabinet plate mesa approach to do a good job of protection measures, the general installation is to assemble the cabinet, and then place the installation cabinet, and then install the table and hardware, if the need for wall holes, should be given to the installation workers in advance to see the water and electricity diagram control diagram, to avoid the damage caused by drilling water and electricity pipelines, in the installation of table and hardware accessories, We must pay special attention to see whether the gap treatment of the stepping surface is reasonable, and whether there are scratches on the surface.
2. Floor paving details
When the floor is laid, the most important thing is to do a good job at the basic level, to ensure that the basic level is smooth and the dry humidity is moderate. In the installation process, we should see whether the installation workers have intentional losses.
3. Hardware installation details
During the installation process, there will be a lot of small hardware accessories, such as towel racks and sheltering racks. Many of these small accessories are manually installed by the installer. It should be noted that where holes need to be drilled on the wall, we must carefully check the water and electricity road drawings to avoid damage to the water and electricity pipe line due to drilling.
4. Pay attention to installation acceptance
After the overall installation is completed, acceptance is also necessary to see whether the product is firm, there are no scratches, whether the connection is close, if found to cause partial damage, must be put forward and discuss the solution.
