When we use the toilet, we cover the toilet seat. Sometimes the toilet seat will suddenly fall and make a very loud noise. Sometimes the toilet seat will fall slowly, which is actually because the toilet seat damper control. If the damper is broken, the toilet seat will fall very quickly and very loudly. At this time we need to repair the damper.
A, toilet seat damper maintenance drawing
The toilet damper acts as a slow drop so that the lid does not suddenly drop. If the damper is to be repaired, it is usually replaced. The original toilet seat needs to be removed first. The pins at the ends of the joint between the toilet seat and the toilet seat are the damper system of the toilet seat. Lift and remove the toilet seat by pushing the dowel inward with a tool. Measure and observe the size and style of the dowels removed, then purchase the same model of dowels. Install the new dowel on the toilet seat in reverse order, align the two holes in the dowel with the post on the toilet seat, and press down to complete the installation.
Two, how to install the toilet seat damper
1. Before removing the toilet seat cover, you need to equip the wrench. For easy tightening, it is best to use an Allen wrench.
2. Locate the pin on the back of the toilet seat, then use a wrench to loosen the pin and internal screw
3. If you do not need to replace the toilet seat, tighten it with a wrench. If the toilet seat and dowel need to be replaced, replace and reinstall them.
Three, what is the damping principle of toilet seat cover
When the toilet is dropped, the rotating shaft is driven and the damping oil is squeezed by screws from the direction of the large hole to the direction of the small hole. Usually used when the toilet seat is heavy, it will be filled with a certain amount of damping oil, and there is a rotating shaft in the middle. The rotating shaft is processed into a spiral shape and discharged from the hole, so it can only be slowly discharged to achieve the slow down function of the toilet. We can check by lowering the standing toilet seat, if the seat can stay in any position and fall slowly and evenly, then the toilet seat is fine. If the toilet seat or seat seat falls off quickly, it indicates that the damping slow down system has failed.
Maintenance drawing of toilet seat damper
