The working principle of wind energy water heater
Wind energy water heater is also called air energy water heater, air energy heat pump, air energy heat pump water heater, air source water heater, air source heat pump, air source heat pump water heater) The refrigerant in the air absorbs the low temperature heat energy in the air, and converts it into high temperature after being compressed by the compressor Thermal energy, heating water temperature. This kind of water heater (wind energy water heater) has the characteristics of high efficiency and energy saving, and its energy saving effect is 4 times that of electric water heaters, 3 times that of gas water heaters, and about 2 times that of solar water heaters. A water heater that can provide the different hot water needs of the whole family with flood volume, high water pressure, and constant temperature 24 hours a day, and at the same time can meet the above requirements with the least energy consumption.
A wind energy water heater for wind power generation. It includes a wind energy generator, a water heater, an electric heating rod is arranged in the water heater, and the electric output of the wind energy generator is connected to the electric heating rod of the water heater. Applicable to the advantages of the new type, it directly converts wind energy into electrical energy and then into heat energy, effectively uses wind energy, and can provide hot water at any time. The use of the water heater is not affected by factors such as weather and high electricity prices, and the quality of people is improved. The wind energy water heater includes a wind energy generator, a water heater, and an electric heating rod inside the water heater, and is characterized in that the power output of the wind energy generator is electrically connected to the electric heating rod of the water heater.
Installation and maintenance of wind energy water heater
The high-efficiency broad-spectrum wind energy water heater is a kind of wind heating equipment with simple structure, high efficiency and low manufacturing cost discovered by the inventors. It can be widely used in household hot water production, greenhouse vegetable production, thermal power generation water preheating, and drying. Wind energy water heater heating technology without secondary pollution. Different from the traditional electric heating method, starting from the inverse problem of motor consumption and temperature rise, the energy is provided by the wind, and it is heated by the principle of hysteresis, eddy current and secondary induction current. It is combined with the water tank to heat the water level. And the temperature can be controlled at will. Easy to install.
There are shelters above and around the water heater, or there is a lot of smoke and dust in the local air, and there is a lot of dust outside the collector. Disposal method: Remove the covering or re-select the installation location. In the heavily polluted area, the user should wipe the heat collecting tube regularly. In order to ensure the normal use of the water heater, the safety valve needs to be maintained no less than once a month to ensure the normal pressure relief of the safety valve. Regularly carry out system sewage discharge to prevent pipeline blockage; and clean the water tank to ensure clean water quality. When discharging sewage, as long as the water inflow is guaranteed to be normal, open the sewage valve, and clean water will flow out of the sewage valve.
