When decorating the bathroom, it is very necessary to install a shower room, but many friends do not know how to install a shower room. So how to install the shower room? What are the precautions? The following editor will introduce the installation method and precautions of the shower room for you.
How to install the shower room and what are the precautions (pictures from the Internet)
How to install the shower room? Generally speaking, the installation of bathroom shower room can be divided into six steps. The following editor will roughly explain each step:
1. Install the bottom basin parts of the shower basin according to the instructions, then place the bottom basin at the installation position, and then adjust the bottom basin to a horizontal position. During the installation process, make sure that there is no water in the bottom basin, and the hose can be stretched. The connection between the basin and the floor drain is firm.
2. After the base is installed, you need to add water to test whether the water pipe is unblocked, and then use a pencil to drill holes in the aluminum drilling position against the wall. After drilling the hole, knock in an appropriate amount of rubber particles on the edge of the hole, and then fix and lock the aluminum strip on the wall with screws.
3. After installing the aluminum plate, clamp the glass to the place where the bottom basin is drilled, then install the fixing seat, and connect the jacking pipe. Then use the elbow sleeve to fix the top of the glass firmly.
4. After the glass is installed, it is necessary to prepare to turn the movable door secretly. For the hardware of the movable door, the hinge should be turned secretly in the hole reserved for the fixed door, and then the position of the hinge and the axis should be adjusted. Until the door feels comfortable to close.
5. According to the instructions, install the glass with suction strips or water-retaining adhesive strips, and then use silica gel to seal the joints of the aluminum, wall, glass and bottom basin.
6. There are so many installations of the shower room in the bathroom. The last step is also the most critical step. It is to confirm the various parts installed before, whether the confirmed oak shower room is firm, and whether the hinge is easy to use. Then Remove the garbage and residual dirt during the installation process.
After understanding how to install the shower room, you should also pay attention to the precautions for the installation of the shower room.
1. In order to ensure the smoothness of the overall shower room pulley, lubricant or peanut oil can be added appropriately.
2. When the pulley of the track-type shower room is loose or falling off, it is necessary to find the maintenance personnel to adjust it in time to ensure the effective load of the pulley to the movable door, and then use a paper towel dipped in peanut oil to clean the foreign matter in the track to ensure smooth sliding; Avoid forceful impact activities door, so as not to cause the movable door to fall off.
3. Do not hit the glass with sharp and hard objects, especially the four sides and four corners.
Through the introduction of the editor, everyone knows the installation method and precautions of the shower room. The editor reminds that after installing the shower room, you must pay attention to the cleaning and maintenance work in the future, so that you can have a relaxed and tidy shower environment.
