The shower hose makes our shower more convenient, but the shower is often pulled randomly during use, so it is very vulnerable to damage. Once the shower hose has problems such as water leakage, we need to find out the cause and replace it in time. Today, the editor is here to tell you that the hose leakage of the shower should be dealt with.
Reasons for shower hose leaks:
1. Possible reasons: Improper installation, deformation of the rubber ring, uneven or too thin joint of the outlet pipe, mismatch between the hose and the shower.
Maintenance method: choose the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall.
2. Possible cause: the hose is broken.
Maintenance method: Just replace it with a new hose.
3. Possible reasons: Improper adjustment, foreign matter and scale.
Maintenance method: Rotate the shower nozzle to adjust it. If it still doesn’t work, open a small round cap in the middle of the shower nozzle with a small flat screwdriver, unscrew the screw with a plum screwdriver, turn on the shower, rinse with clean water, brush the shower hole with a toothbrush, and then install and restore.
Choose the right shower hose:
Shower hose Various metal hoses, braided hoses, PVC reinforced hoses. Different materials have writing differences, and there is no absolute answer to which one is better. When you buy it in a hardware store, you can compare several materials. The key points are smoothness of the surface, uniform gap, smooth feel, natural expansion, firm structure, and strong damage resistance. In addition, the size of the shower hose should match the shower head, and the general size is 14mm, 16mm, 17mm and 18mm in outer diameter. You can take the old hose up and buy a new one for comparison.
How to replace the shower hose:
First of all, you need to replace the old hose, just unscrew the flower hose from the shower and the two ends of the faucet by hand. Then replace it with a new shower hose, screw one end to the shower and the other end to the faucet, and just screw on the threads. But it takes some effort, usually the men will do it for you, and the girls will help you cheer up and wipe off your sweat.
Shower hose problems
The connection between the shower hose and the water inlet pipe is connected and fixed by a screw cap hose to the valve body. The problem is that the screw cap tends to loosen, rust or even fall off as time goes by.
The bigger problem is that during your bathing process, this hose is pulled most frequently, and the range is often large, which will cause the metal hose to break at the place where the screw cap meets. What’s more, the other end of the hose is connected to the shower head in the same way. If the owner does not operate it properly, such as using too much force, it is also easy to break.
We have never seen a situation where the middle of the metal hose breaks first and both ends are intact, is it so? Many users have not paid attention to this point, and lack of maintenance knowledge in this area.
How to maintain the shower hose
Speaking of this, everyone should already understand how to maintain the shower hose. Here are a few points for your reference:
First of all, everyone should keep the metal hose in a natural stretch state when taking a shower. After use, the shower head should be inserted on the shelf, and the metal hose should not be coiled on the shower faucet.
Secondly, when pulling the hose, it is necessary to prevent the joint between the hose and the valve body from forming a dead knot. Be sure to look carefully and use a lighter force when pulling the hose, so as to prevent the metal hose from being broken or the hose from being broken. cause damage.
