Affect the lives of the residents downstairs. Once a bathroom leak accident occurs, it is very troublesome. Therefore, today we will bring you relevant content on how to make the bathroom wall waterproof, to help you solve your confusion.
Bathroom wall waterproof construction steps:
1. First, do a good job of waterproofing the bathroom floor. First of all, do leveling. If you want to replace the floor tiles in the bathroom, after the original floor tiles are chiseled, you must use cement mortar to level the ground, and then do waterproofing. This can prevent the waterproof coating from leaking due to uneven thickness.
2. The seams should be brushed in place. The joints between the bathroom wall and the ground and the joints between the upper and lower water pipes and the ground are the most prone to problems. During the construction, you must urge the workers to deal with these corners, so the waterproof coating must be applied in place.
3. Wall treatment is also very important. In the general bathroom waterproofing treatment, about 30 cm of waterproof paint should be applied on the wall to prevent the accumulated water from seeping through the wall. However, if the wall of the bathroom is a non-load-bearing light-body wall, the entire wall must be covered with waterproof paint. If your home uses a two-panel shower screen, the two connected walls should also be painted. If you use a bathtub in your home, the height of the waterproof coating on the wall adjacent to the bathtub should be higher than the upper edge of the bathtub.
4. Waterproof test must be done. After the construction of the toilet is completed, all the drains in the toilet are blocked, and a 25 cm high “can” is built at the door, and then 20 cm high water is poured into the toilet. After 24 hours, check the surrounding walls and floors for leaks. This 24-hour waterproof test is the key to ensure the quality of bathroom waterproofing, you must do it.
5. Keep the water unobstructed. All sewer pipes in the bathroom, including floor drains and sanitary ware sewer pipes, must be kept unobstructed. Only in this way can the tragedy of “flooding the Seventh Army” be fundamentally avoided.
Precautions for wall waterproofing
1. The choice of waterproof coating is very important. You must choose a good coating, otherwise it will cause the coating to peel off, and it will not be waterproof.
2. Before the waterproof decoration of the wall starts, it must pass a strict waterproof inspection before starting other projects.
3. It is best to find a professional decoration company for wall waterproofing, otherwise unexpected mistakes will occur.
Is the information on bathroom waterproof measures helpful to the owners? Let’s write here first. For more decoration knowledge, please continue to pay attention to Fuwo Home Furnishing. Fuwo Home Furnishing.com will provide you with more complete, detailed and updated information.
