Toilet decoration effect picture
One, acrylic bathtub clean
Acrylic is a special plastic material, can be made into a variety of shapes, but the shortcomings are also obvious, is not durable, easy to scratch easy aging discoloration, so in daily cleaning and maintenance especially need to pay attention to.
Acrylic bath every week to use sponge or flannelette, do not use coarse cloth, clean cloth, do not use any cleaning agent containing granular objects, it is best to avoid direct contact with the sun. Use mild cleaning agent (such as dishwashing liquid), do not use abrasive cleaning agent, can also choose glass water to clean Alec bathtub.
Two, wooden bathtub clean
The appearance of wooden bathtubs can be traced back to ancient times, when dignitaries liked to soak in wooden bathtubs to relax. In the daily cleaning of the wooden bathtub, attention should be paid to completely drain the sewage, so as not to accelerate the aging of the wood and the generation of mildew.
Because the wood itself will expand and shrink, can not directly bask in the sun or be blown by the cold wind, if a long time does not reach more than two months, the wooden bucket can be wet and sealed with a large plastic bag to avoid the air to take away the moisture. Usually when not in use, it is best to put a little water, so that it can absorb moisture, keep the wood saturated and moist, but not too much water, because the bathroom itself has a certain humidity.
Three, cast iron bathtub clean
Cast iron bathtubs are made by first using cast iron to outline the shape of the bathtub and then spraying glaze treated with high temperature on the surface of cast iron. The ultra-thin glaze plated on the surface of cast iron can protect the cast iron from oxidation, rust and corrosion. And because cast iron and glaze are extremely durable materials, cast iron bathtubs can be used for 50 years.
[Bath cleaning and maintenance of daily use of sanitary ware] Cast iron bathtub after each use should be fully washed with water, and dry with a soft cloth. If you encounter stubborn stains, use a small amount of abrasive cleaning agent for cleaning. Clean the non-slip surface at the bottom with a soft nylon brush. Do not scrub with wire ball, wire brush or abrasive sponge.
